8613410535143
MK56 Series Digital Pressure Sensor for General Fluids - China Suppliers and Factory, Waterproof & Corrosion Resistant Design
Application Industry
Pipeline pressure monitoring
Air leak testing
F.R.L (Filter, Regulator, Lubricator)
Gas storage cylinders
Adsorption verification
Air compressors
Product Parameters
Parameter Category |
Specific Parameter |
Specification |
Withstand Pressure |
High pressure |
2.5MPa (high pressure) |
Positive pressure |
1.5MPa (positive pressure) |
|
Compound pressure |
500kPa (compound pressure) |
|
Rated Pressure Range |
High pressure |
0.000～2.000MPa (high pressure) |
Positive pressure |
-0.100～1.000MPa (positive pressure) |
|
Compound pressure |
-100～100kPa (compound pressure) |
|
Protection Grade |
- |
IP65 |
Extension analog output range |
High pressure |
-0.1～0MPa (high pressure) |
Positive and negative pressure |
-0.1～0MPa (positive and negative pressure) |
|
Compound pressure |
- |
|
Suitable fluid |
- |
Non-corrosive fluid for SUS316L and FKM |
Power supply voltage |
- |
12~24V DC±10% Ripple(P-P)≤ 10% |
Ambient Temperature |
- |
Action: -10~60℃, Storage: -20~70℃ (no condensation or icing) |
Degree of linearity |
- |
±0.5%F.S. |
Insulation resistance |
- |
50 MΩ or more (500 VDC measured via megohmmeter) between terminals and housing |
Humidity |
Action and storage |
35～85% (no water condensation) |
Power supply Output connection cable |
- |
Oil resistant vinyl rubber insulated cable with pipe 3-core Conductor cross-sectional area 0.2 mm² |
Temperature characteristic |
- |
±2% F.S. (0-50°C reference) ±3% F.S. (-10-60°C reference) |
Withstand voltage |
- |
AC250V 1 min, between all charging parts and housing |
Applicable Gas |
- |
Non-corrosive fluid for SUS316 and FKM |
Material |
- |
Shell, pipe port, pressure sensor: SUS316L, FKM |
Nozzle diameter |
- |
R1/8"(M5*0.8) RC1/8"(M5*0.8) VCR1/4" R1/4" 1/4" |
Design Aesthetics
Frequently Asked Questions
Q
What is the maximum withstand pressure of this pressure sensor?
The sensor supports up to 2.5MPa for high pressure, 1.5MPa for positive pressure, and 500kPa for compound pressure, making it suitable for a wide range of industrial pressure monitoring applications.
Q
What is the IP protection rating of this sensor?
This pressure sensor carries an IP65 protection rating, meaning it is fully dust-tight and protected against low-pressure water jets, making it reliable in demanding industrial environments.
Q
What types of fluids and gases are compatible with this sensor?
The sensor is compatible with non-corrosive fluids and gases suitable for SUS316L and FKM materials. The shell, pipe port, and pressure sensor components are all constructed from SUS316L and FKM for enhanced durability and chemical resistance.
Q
What power supply voltage does this sensor require?
The sensor operates on a power supply voltage of 12~24V DC ±10%, with a ripple (P-P) of ≤10%. This wide voltage range makes it compatible with most standard industrial power systems.
Q
What are the typical application industries for this pressure sensor?
This sensor is widely used in pipeline pressure monitoring, air leak testing, F.R.L (Filter, Regulator, Lubricator) systems, gas storage cylinders, adsorption verification, and air compressors, covering a broad spectrum of pneumatic and industrial automation applications.
Q
What nozzle diameter options are available for this sensor?
The sensor is available with multiple nozzle diameter options including R1/8" (M5×0.8), RC1/8" (M5×0.8), VCR1/4", R1/4", and 1/4", providing flexible installation compatibility for various piping configurations.