8613410535143
01
JK50 Series Waterproof Series Pressure sensor Stable with IP65
Application industry
Pipeline pressure monitoring
Air leak testing
F.R.L (Filter, Regulator, Lubricator)
Gas storage cylinders
Adsorption verification
Air compressors
Product Parameters
Parameter Category |
Specific Parameter |
Specification |
Withstand Pressure |
Micro pressure |
20kPa (micro pressure) |
Positive pressure |
1.5MPa (positive pressure) |
|
Compound pressure |
500kPa (cpmpound pressure) |
|
Rated Pressure Range |
Micro pressure |
-10～10kPa (micro pressure) |
Positive pressure |
-0.100～1.000MPa (positive pressure) |
|
Compound pressure |
-100～100kPa (positive pressure) |
|
Protection Grade |
- |
IP65 |
Set Pressure Range |
Micro pressure |
-10.3～10.3kPa (micro pressure) |
Positive and negative pressure |
-0.100～1.000MPa (positive and negative pressure) |
|
Compound pressure |
-103.0～103.0KPa (positive pressure) |
|
Display Refresh Rate |
- |
5 times/second |
RS485 Communication Distance |
- |
Maximum connection distance ≤1200m |
Ambient Temperature |
- |
0～50℃ |
Color |
- |
Red |
Load Current |
- |
≤200mA |
Humidity |
Action and storage |
35～85% (no water condensation) |
Internal Pressure Drop |
- |
≤1.0V |
Wire Specification |
- |
Oil-resistant PVC cable (0.15mm²) |
Current Consumption |
No load |
≤40mA |
Repeatability Accuracy |
- |
±0.3%F.S ±1digit |
Linearity |
- |
±1%F.S |
Action Indication |
- |
OUT1 |
Weight |
|
Approximately108g |
Applicable Gas |
- |
Filtered air, Non-corrosive/Non-flammable gas |
Minimum Unit Scale Value |
Positive pressure type kPa |
kPa(0.001), kgf/cm²(0.01), bar(0.01), psi(0.1) |
Micro and positive-negative pressure type kPa |
kPa(0.1), mmHg(1), kgf/cm²(0.001), bar(0.001), psi(0.01), inHg(0.1) |
|
Vibration Resistance |
Amplitude, frequency, time |
Amplitude 1.5mm, 10Hz～55Hz～10Hz per minute, 2 hours for each of X, Y, Z directions |
Storage Temperature |
Storage |
-10℃～60℃ (without water condensation and freezing) |
Temperature Characteristic |
- |
±3%F.S, reference temperature 25℃ (0～50℃ temperature range) |
Baud Rate |
- |
9600bps, 19200bps, 38400bps, 57600bps, 115200bps |
Insulation Resistance |
Between lead and plastic shell |
≥50MΩ (DC 500V) |
Output Voltage |
Rated voltage |
0.6V～5V ±2.5%F.S (rated voltage) |
Display Accuracy |
- |
±1%F.S ±1digit (temperature 25±3℃) |
Withstand Voltage |
Between lead and plastic shell |
AC 1000V for 1 minute |
Impact Resistance |
- |
100m/s²(10G), 3 times for each of X, Y, Z directions |
Output Type |
- |
Open collector output (NPN or PNP, up to 2 outputs |
Interface Diameter |
- |
RC1/8 |
Response Time |
- |
≤2.5ms (can be set to 25, 100, 250, 500, 1000, 1500ms) |
Design Aesthetics
frequently asked questions
-
Q: What are the core advantages of the JK50 Series Digital Display Pressure Sensor?
Answer: This series of sensors adopts imported high-precision chips, ensuring stronger stability; it is equipped with a high-definition and high-brightness LED display with large, non-ghosting fonts for clear readability; it has an IP65 protection rating, providing waterproof and dustproof performance, and can adapt to air environments with condensation; it supports multiple unit switching, key locking (to prevent misoperation), and power-saving mode, featuring flexible functions; it has built-in over current/short-circuit protection, automatic fault diagnosis and alarm functions, and is equipped with an RS485 communication interface, enabling real-time data collection and remote setting. The single-channel output current can reach 200mA, allowing direct control of high-load equipment. -
Q: What are the applicable media and measurement range of the JK50 Series?
-
Q: What about the measurement accuracy and protection performance of the product?
-
Q: What output methods and communication functions does the JK50 Series have?
-
Q: What preparation work is required before installation?
-
Q: What is the correct installation method?
-
Q: How to activate the power-saving mode and what is its function?