8613410535143
High-Precision Digital Pressure Sensor with 3-Screen Display - China Suppliers and Factory
Application Industry
Pipeline pressure monitoring
Air leak testing
F.R.L (Filter, Regulator, Lubricator)
Gas storage cylinders
Adsorption verification
Air compressors
Product Parameters
Parameter Category |
Specific Parameter |
Specification |
Withstand Pressure |
High pressure |
3.0MPa (high pressure) |
Positive pressure |
2.0MPa (positive pressure) |
|
Compound pressure |
500kPa (compound pressure) |
|
Rated Pressure Range |
High pressure |
0.000～2.000MPa (high pressure) |
Positive pressure |
-0.100～1.000MPa (positive pressure) |
|
Compound pressure |
-100～100kPa (compound pressure) |
|
Protection Grade |
- |
IP65 |
Set Pressure Range |
High pressure |
-0.103～2.030MPa (high pressure) |
Positive and negative pressure |
-0.103～1.030MPa (positive and negative pressure) |
|
Compound pressure |
-103.0～103.0KPa (positive pressure) |
|
Display Refresh Rate |
- |
5 times/second |
RS485 Communication Distance |
- |
Maximum connection distance ≤1200m |
Ambient Temperature |
- |
0～50℃ |
Color |
- |
3 colors (white / red / orange) |
Load Current |
- |
≤200mA |
Humidity |
Action and storage |
35～85% (no water condensation) |
Internal Pressure Drop |
- |
≤1.0V |
Wire Specification |
- |
Oil-resistant PVC cable (0.15mm²) |
Current Consumption |
No load |
≤40mA |
Repeatability Accuracy |
- |
±0.3%F.S ±1digit |
Linearity |
- |
±1%F.S |
Action Indication |
- |
OUT1 |
Weight |
|
Approximately 108g |
Applicable Gas |
- |
Air, non-corrosive, non-flammable corrosion-resistant |
Minimum Unit Scale Value |
Positive pressure type kPa |
kPa(0.001), kgf/cm²(0.01), bar(0.01), psi(0.1) |
Micro and positive-negative pressure type kPa |
kPa(0.1), mmHg(1), kgf/cm²(0.001), bar(0.001), psi(0.01), inHg(0.1) |
|
Vibration Resistance |
Amplitude, frequency, time |
Amplitude 1.5mm, 10Hz～55Hz～10Hz per minute, 2 hours for each of X, Y, Z directions |
Storage Temperature |
Storage |
-10℃～60℃ (without water condensation and freezing) |
Temperature Characteristic |
- |
±3%F.S, reference temperature 25℃ (0～50℃ temperature range) |
Baud Rate |
- |
9600bps, 19200bps, 38400bps, 57600bps, 115200bps |
Insulation Resistance |
Between lead and plastic shell |
≥50MΩ (DC 500V) |
Output Voltage |
Rated voltage |
0.6V～5V ±2.5%F.S (rated voltage) |
Display Accuracy |
- |
±1%F.S ±1digit (temperature 25±3℃) |
Withstand Voltage |
Between lead and plastic shell |
AC 1000V for 1 minute |
Impact Resistance |
- |
100m/s²(10G), 3 times for each of X, Y, Z directions |
Output Type |
- |
Open collector output (NPN or PNP, up to 2 outputs) |
Interface Diameter |
- |
M5 or plus adapter |
Response Time |
- |
≤2.5ms (can be set to 25, 100, 250, 500, 1000, 1500ms) |
Design Aesthetics
Frequently Asked Questions
Q
What is the maximum withstand pressure of this pressure sensor?
The sensor supports up to 3.0MPa for high pressure, 2.0MPa for positive pressure, and 500kPa for compound pressure. These ratings ensure reliable performance across a wide range of industrial pneumatic applications.
Q
What is the protection grade of this pressure sensor?
This pressure sensor carries an IP65 protection grade, meaning it is fully dust-tight and protected against low-pressure water jets from any direction. It is suitable for use in demanding industrial environments.
Q
What types of gases is this sensor compatible with?
The sensor is designed for use with air and other non-corrosive, non-flammable, corrosion-resistant gases. It is not recommended for use with corrosive or flammable media.
Q
Does this sensor support RS485 communication, and what is the maximum connection distance?
Yes, the sensor supports RS485 communication with a maximum connection distance of up to 1200 meters. It also supports multiple baud rates including 9600bps, 19200bps, 38400bps, 57600bps, and 115200bps, making it highly flexible for system integration.
Q
What industries and applications is this pressure sensor suitable for?
This sensor is widely used across multiple industries including pipeline pressure monitoring, air leak testing, F.R.L (Filter, Regulator, Lubricator) systems, gas storage cylinders, adsorption verification, and air compressors. Its versatility makes it ideal for both factory automation and pneumatic control systems.
Q
What is the display accuracy and response time of this sensor?
The display accuracy is ±1%F.S ±1digit at a reference temperature of 25±3℃, with a display refresh rate of 5 times per second. The response time is ≤2.5ms by default, and can be configured to 25, 100, 250, 500, 1000, or 1500ms depending on application requirements.