8613410535143
Corrosion-Resistant Pressure Sensors for Semiconductor Industries - China Suppliers & Factory Quality
Application Industry
Pipeline pressure monitoring
Air leak testing
F.R.L (Filter, Regulator, Lubricator)
Gas storage cylinders
Adsorption verification
Air compressors
Product Parameters
Full technical specifications listed below
Parameter Category |
Specific Parameter |
Specification |
Withstand Pressure |
High pressure |
3.0MPa (high pressure) |
Positive pressure |
2.0MPa (positive pressure) |
|
Compound pressure |
500kPa (compound pressure) |
|
Rated Pressure Range |
High pressure |
0.000～2.000MPa (high pressure) |
Positive pressure |
-0.100～1.000MPa (positive pressure) |
|
Compound pressure |
-100～100kPa (compound pressure) |
|
Protection Grade |
- |
IP65 |
Set Pressure Range |
High pressure |
-0.103～2.030MPa (high pressure) |
Positive and negative pressure |
-0.103～1.030MPa (positive and negative pressure) |
|
Compound pressure |
-103.0～103.0KPa (positive pressure) |
|
Display Refresh Rate |
- |
5 times/second |
RS485 Communication Distance |
- |
Maximum connection distance ≤1200m |
Ambient Temperature |
- |
0～50℃ |
Color |
- |
3 colors （white red orange） |
Load Current |
- |
≤200mA |
Humidity |
Action and storage |
35～85% (no water condensation) |
Internal Pressure Drop |
- |
≤1.0V |
Wire Specification |
- |
Oil-resistant PVC cable (0.15mm²) |
Current Consumption |
No load |
≤40mA |
Repeatability Accuracy |
- |
±0.3%F.S ±1digit |
Linearity |
- |
±1%F.S |
Action Indication |
- |
OUT1 |
Weight |
|
Approximately 108g |
Applicable Gas |
- |
Non-corrosive fluid for SUS316 and FKM |
Minimum Unit Scale Value |
Positive pressure type kPa |
kPa(0.001), kgf/cm²(0.01), bar(0.01), psi(0.1) |
Micro and positive-negative pressure type kPa |
kPa(0.1), mmHg(1), kgf/cm²(0.001), bar(0.001), psi(0.01), inHg(0.1) |
|
Vibration Resistance |
Amplitude, frequency, time |
Amplitude 1.5mm, 10Hz～55Hz～10Hz per minute, 2 hours for each of X, Y, Z directions |
Storage Temperature |
Storage |
-10℃～60℃ (without water condensation and freezing) |
Temperature Characteristic |
- |
±3%F.S, reference temperature 25℃ (0～50℃ temperature range) |
Baud Rate |
- |
9600bps, 19200bps, 38400bps, 57600bps, 115200bps |
Insulation Resistance |
Between lead and plastic shell |
≥50MΩ (DC 500V) |
Output Voltage |
Rated voltage |
0.6V～5V ±2.5%F.S (rated voltage) |
Display Accuracy |
- |
±1%F.S ±1digit (temperature 25±3℃) |
Withstand Voltage |
Between lead and plastic shell |
AC 1000V for 1 minute |
Impact Resistance |
- |
100m/s²(10G), 3 times for each of X, Y, Z directions |
Output Type |
- |
Open collector output (NPN or PNP, up to 2 outputs) |
Interface Diameter |
- |
RC1/8" VCR1/4" R1/4" M5" |
Response Time |
- |
≤2.5ms (can be set to 25, 100, 250, 500, 1000, 1500ms) |
Design Aesthetics
Frequently Asked Questions
Q
What is the maximum withstand pressure of this pressure sensor?
The sensor supports up to 3.0MPa for high pressure, 2.0MPa for positive pressure, and 500kPa for compound pressure. Always ensure operating conditions remain within the rated pressure range to guarantee sensor longevity and accuracy.
Q
What communication interface does this sensor support, and what is the maximum communication distance?
The sensor is equipped with an RS485 communication interface, supporting a maximum connection distance of ≤1200m. It supports multiple baud rates including 9600bps, 19200bps, 38400bps, 57600bps, and 115200bps, making it suitable for long-distance industrial monitoring applications.
Q
What is the IP protection rating of this pressure sensor?
This pressure sensor carries an IP65 protection rating, meaning it is fully dust-tight and protected against low-pressure water jets. This makes it well-suited for demanding industrial environments such as pipeline monitoring, air compressor systems, and gas storage applications.
Q
What types of gases or fluids is this sensor compatible with?
The sensor is compatible with non-corrosive fluids suitable for SUS316 and FKM (Viton) materials. It is ideal for use with clean air, nitrogen, and similar non-aggressive gases commonly found in pneumatic and industrial automation systems.
Q
What output types are available, and how fast is the response time?
The sensor offers an open collector output (NPN or PNP) with up to 2 outputs. The default response time is ≤2.5ms, and it can be configured to 25, 100, 250, 500, 1000, or 1500ms depending on your application requirements, providing excellent flexibility for both fast-switching and stable monitoring tasks.
Q
What is the operating temperature range, and how does temperature affect accuracy?
The sensor operates within an ambient temperature range of 0～50℃ and can be stored between -10℃ and 60℃. Temperature characteristics are rated at ±3%F.S with a reference temperature of 25℃, ensuring reliable and consistent readings across the full operating range.