8613410535143
Corrosion-Resistant Pressure Sensor with RS485 Communication - Reliable China Suppliers and Factory
Application Industry
Pipeline pressure monitoring
Air leak testing
F.R.L (Filter, Regulator, Lubricator)
Gas storage cylinders
Adsorption verification
Air compressors
Product Parameters
Parameter Category |
Specific Parameter |
Specification |
Withstand Pressure |
High pressure |
3.0MPa (high pressure) |
Positive pressure |
1.5MPa (positive pressure) |
|
Compound pressure |
500kPa (compound pressure) |
|
Rated Pressure Range |
High pressure |
0.000～1.999MPa (high pressure) |
Positive pressure |
-0.100～1.000MPa (positive pressure) |
|
Compound pressure |
-100～100kPa (compound pressure) |
|
Protection Grade |
- |
IP65 |
Set Pressure Range |
High pressure |
-0.103～1.999MPa (high pressure) |
Positive and negative pressure |
-0.103～1.030MPa (positive and negative pressure) |
|
Compound pressure |
-103.0～103.0KPa (positive pressure) |
|
Display Refresh Rate |
- |
5 times/second |
RS485 Communication Distance |
- |
Maximum connection distance ≤1200m |
Ambient Temperature |
- |
0～50℃ |
Color |
- |
Red |
Load Current |
- |
≤200mA |
Humidity |
Action and storage |
35～85% (no water condensation) |
Internal Pressure Drop |
- |
≤1.0V |
Wire Specification |
- |
Oil-resistant PVC cable (0.15mm²) |
Current Consumption |
No load |
≤40mA |
Repeatability Accuracy |
- |
±0.3%F.S ±1digit |
Linearity |
- |
±1%F.S |
Action Indication |
- |
OUT1 |
Weight |
|
Approximately 148g |
Applicable Gas |
- |
Non-corrosive fluid for SUS316 and FKM |
Minimum Unit Scale Value |
Positive pressure type kPa |
kPa(0.001), kgf/cm²(0.01), bar(0.01), psi(0.1) |
Micro and positive-negative pressure type kPa |
kPa(0.1), mmHg(1), kgf/cm²(0.001), bar(0.001), psi(0.01), inHg(0.1) |
|
Vibration Resistance |
Amplitude, frequency, time |
Amplitude 1.5mm, 10Hz～55Hz～10Hz per minute, 2 hours for each of X, Y, Z directions |
Storage Temperature |
Storage |
-10℃～60℃ (without water condensation and freezing) |
Temperature Characteristic |
- |
±3%F.S, reference temperature 25℃ (0～50℃ temperature range) |
Baud Rate |
- |
9600bps, 19200bps, 38400bps, 57600bps, 115200bps |
Insulation Resistance |
Between lead and plastic shell |
≥50MΩ (DC 500V) |
Output Voltage |
Rated voltage |
0.6V～5V ±2.5%F.S (rated voltage) |
Display Accuracy |
- |
±1%F.S ±1digit (temperature 25±3℃) |
Withstand Voltage |
Between lead and plastic shell |
AC 1000V for 1 minute |
Impact Resistance |
- |
100m/s²(10G), 3 times for each of X, Y, Z directions |
Output Type |
- |
Open collector output (NPN or PNP, up to 2 outputs) |
Interface Diameter |
- |
RC1/8" VCR1/4" R1/4" 1/4" |
Response Time |
- |
≤2.5ms (can be set to 25, 100, 250, 500, 1000, 1500ms) |
Design Aesthetics
Frequently Asked Questions (FAQ)
Q
What is the maximum withstand pressure of this pressure sensor?
The sensor supports up to 3.0MPa for high pressure type, 1.5MPa for positive pressure type, and 500kPa for compound pressure type. These ratings ensure reliable performance across a wide range of industrial applications.
Q
What is the protection grade of this pressure sensor?
The sensor carries an IP65 protection rating, meaning it is fully dust-tight and protected against low-pressure water jets. This makes it suitable for use in harsh industrial environments including air compressors, pipeline monitoring, and air leak testing.
Q
Does this sensor support RS485 communication, and what is the maximum connection distance?
Yes, this sensor supports RS485 communication with a maximum connection distance of up to 1200 meters. It also supports multiple baud rates including 9600bps, 19200bps, 38400bps, 57600bps, and 115200bps, providing flexible integration options for industrial control systems.
Q
What types of gases or fluids is this sensor compatible with?
This sensor is compatible with non-corrosive fluids suitable for SUS316 stainless steel and FKM (Fluoroelastomer) materials. It is ideal for use with air, nitrogen, and other non-corrosive industrial gases.
Q
What is the response time of this pressure sensor?
The default response time is ≤2.5ms. It can also be configured to 25ms, 100ms, 250ms, 500ms, 1000ms, or 1500ms depending on the application requirements, offering excellent flexibility for both fast-response and stable-reading scenarios.
Q
What output types does this sensor support and what are the available interface sizes?
The sensor supports open collector output in both NPN and PNP configurations, with up to 2 outputs available. Available interface diameters include RC1/8", VCR1/4", R1/4", and 1/4", making it compatible with a wide range of pneumatic and industrial piping systems.