8613410535143
China Suppliers JK20 Series Corrosion-Resistant Pressure Sensor for Semiconductor Industries | Factory Direct
◆ Application Industry
Pipeline pressure monitoring
Air leak testing
F.R.L (Filter, Regulator, Lubricator)
Gas storage cylinders
Adsorption verification
Air compressors
◆ Product Parameters
Parameter Category |
Specific Parameter |
Specification |
Withstand Pressure |
High pressure |
3.0MPa (high pressure) |
Positive pressure |
2.0MPa (positive pressure) |
|
Compound pressure |
500kPa (compound pressure) |
|
Rated Pressure Range |
High pressure |
0.000～2.000MPa (high pressure) |
Positive pressure |
-0.100～1.000MPa (positive pressure) |
|
Compound pressure |
-100～100kPa (compound pressure) |
|
Protection Grade |
- |
IP65 |
Set Pressure Range |
High pressure |
-0.103～2.030MPa (high pressure) |
Positive and negative pressure |
-0.103～1.030MPa (positive and negative pressure) |
|
Compound pressure |
-103.0～103.0KPa (positive pressure) |
|
Display Refresh Rate |
- |
5 times/second |
RS485 Communication Distance |
- |
Maximum connection distance ≤1200m |
Ambient Temperature |
- |
0～50℃ |
Color |
- |
3 colors （white red orange） |
Load Current |
- |
≤200mA |
Humidity |
Action and storage |
35～85% (no water condensation) |
Internal Pressure Drop |
- |
≤1.0V |
Wire Specification |
- |
Oil-resistant PVC cable (0.15mm²) |
Current Consumption |
No load |
≤40mA |
Repeatability Accuracy |
- |
±0.3%F.S ±1digit |
Linearity |
- |
±1%F.S |
Action Indication |
- |
OUT1 |
Weight |
|
Approximately 108g |
Applicable Gas |
- |
Non-corrosive fluid for SUS316 and FKM |
Minimum Unit Scale Value |
Positive pressure type kPa |
kPa(0.001), kgf/cm²(0.01), bar(0.01), psi(0.1) |
Micro and positive-negative pressure type kPa |
kPa(0.1), mmHg(1), kgf/cm²(0.001), bar(0.001), psi(0.01), inHg(0.1) |
|
Vibration Resistance |
Amplitude, frequency, time |
Amplitude 1.5mm, 10Hz～55Hz～10Hz per minute, 2 hours for each of X, Y, Z directions |
Storage Temperature |
Storage |
-10℃～60℃ (without water condensation and freezing) |
Temperature Characteristic |
- |
±3%F.S, reference temperature 25℃ (0～50℃ temperature range) |
Baud Rate |
- |
9600bps, 19200bps, 38400bps, 57600bps, 115200bps |
Insulation Resistance |
Between lead and plastic shell |
≥50MΩ (DC 500V) |
Output Voltage |
Rated voltage |
0.6V～5V ±2.5%F.S (rated voltage) |
Display Accuracy |
- |
±1%F.S ±1digit (temperature 25±3℃) |
Withstand Voltage |
Between lead and plastic shell |
AC 1000V for 1 minute |
Impact Resistance |
- |
100m/s²(10G), 3 times for each of X, Y, Z directions |
Output Type |
- |
Open collector output (NPN or PNP, up to 2 outputs) |
Interface Diameter |
- |
RC1/8" VCR1/4" R1/4" M5" |
Response Time |
- |
≤2.5ms (can be set to 25, 100, 250, 500, 1000, 1500ms) |
◆ Design Aesthetics
? Frequently Asked Questions
Q
What is the maximum withstand pressure of this pressure sensor?
The sensor supports up to 3.0MPa for high pressure, 2.0MPa for positive pressure, and 500kPa for compound pressure, making it suitable for a wide range of industrial pressure monitoring applications.
Q
What is the IP protection rating of this pressure sensor?
This pressure sensor carries an IP65 protection grade, meaning it is fully dust-tight and protected against low-pressure water jets, ensuring reliable performance in demanding industrial environments.
Q
What communication interfaces does this sensor support?
The sensor supports RS485 communication with a maximum connection distance of up to 1200m. It supports multiple baud rates including 9600bps, 19200bps, 38400bps, 57600bps, and 115200bps for flexible system integration.
Q
What types of gases or fluids is this sensor compatible with?
This sensor is compatible with non-corrosive fluids suitable for SUS316 stainless steel and FKM (fluoroelastomer) materials, making it appropriate for use with clean air, nitrogen, and similar non-aggressive media.
Q
What are the typical application industries for this pressure sensor?
This pressure sensor is widely used in pipeline pressure monitoring, air leak testing, F.R.L (Filter, Regulator, Lubricator) units, gas storage cylinders, adsorption verification systems, and air compressor management across various industrial sectors.
Q
What is the response time and display refresh rate of this sensor?
The sensor features a response time of ≤2.5ms, with adjustable settings of 25, 100, 250, 500, 1000, and 1500ms to suit different application needs. The display refresh rate is 5 times per second, ensuring real-time and accurate pressure readings.