8613410535143
China Suppliers Factory JK80 Series Corrosion-Resistant Pressure Sensor with RS485 Communication - IP65 Waterproof, High Stability
Application Industry
Key Application Scenarios
Pipeline pressure monitoring
Air leak testing
F.R.L (Filter, Regulator, Lubricator)
Gas storage cylinders
Adsorption verification
Air compressors
Product Parameters
Full Technical Specifications
Parameter Category |
Specific Parameter |
Specification |
Withstand Pressure |
High pressure |
3.0MPa (high pressure) |
Positive pressure |
1.5MPa (positive pressure) |
|
Compound pressure |
500kPa (compound pressure) |
|
Rated Pressure Range |
High pressure |
0.000～1.999MPa (high pressure) |
Positive pressure |
-0.100～1.000MPa (positive pressure) |
|
Compound pressure |
-100～100kPa (compound pressure) |
|
Protection Grade |
- |
IP65 |
Set Pressure Range |
High pressure |
-0.103～1.999MPa (high pressure) |
Positive and negative pressure |
-0.103～1.030MPa (positive and negative pressure) |
|
Compound pressure |
-103.0～103.0KPa (positive pressure) |
|
Display Refresh Rate |
- |
5 times/second |
RS485 Communication Distance |
- |
Maximum connection distance ≤1200m |
Ambient Temperature |
- |
0～50℃ |
Color |
- |
Red |
Load Current |
- |
≤200mA |
Humidity |
Action and storage |
35～85% (no water condensation) |
Internal Pressure Drop |
- |
≤1.0V |
Wire Specification |
- |
Oil-resistant PVC cable (0.15mm²) |
Current Consumption |
No load |
≤40mA |
Repeatability Accuracy |
- |
±0.3%F.S ±1digit |
Linearity |
- |
±1%F.S |
Action Indication |
- |
OUT1 |
Weight |
|
Approximately 148g |
Applicable Gas |
- |
Non-corrosive fluid for SUS316 and FKM |
Minimum Unit Scale Value |
Positive pressure type kPa |
kPa(0.001), kgf/cm²(0.01), bar(0.01), psi(0.1) |
Micro and positive-negative pressure type kPa |
kPa(0.1), mmHg(1), kgf/cm²(0.001), bar(0.001), psi(0.01), inHg(0.1) |
|
Vibration Resistance |
Amplitude, frequency, time |
Amplitude 1.5mm, 10Hz～55Hz～10Hz per minute, 2 hours for each of X, Y, Z directions |
Storage Temperature |
Storage |
-10℃～60℃ (without water condensation and freezing) |
Temperature Characteristic |
- |
±3%F.S, reference temperature 25℃ (0～50℃ temperature range) |
Baud Rate |
- |
9600bps, 19200bps, 38400bps, 57600bps, 115200bps |
Insulation Resistance |
Between lead and plastic shell |
≥50MΩ (DC 500V) |
Output Voltage |
Rated voltage |
0.6V～5V ±2.5%F.S (rated voltage) |
Display Accuracy |
- |
±1%F.S ±1digit (temperature 25±3℃) |
Withstand Voltage |
Between lead and plastic shell |
AC 1000V for 1 minute |
Impact Resistance |
- |
100m/s²(10G), 3 times for each of X, Y, Z directions |
Output Type |
- |
Open collector output (NPN or PNP, up to 2 outputs) |
Interface Diameter |
- |
RC1/8" VCR1/4" R1/4" 1/4" |
Response Time |
- |
≤2.5ms (can be set to 25, 100, 250, 500, 1000, 1500ms) |
Design Aesthetics
Frequently Asked Questions
Q
What is the maximum withstand pressure of this pressure sensor?
The sensor supports up to 3.0MPa for high pressure, 1.5MPa for positive pressure, and 500kPa for compound pressure configurations, making it suitable for a wide range of industrial pressure monitoring applications.
Q
What is the protection grade of this product?
This pressure sensor carries an IP65 protection rating, which means it is fully dust-tight and protected against low-pressure water jets, making it reliable in demanding industrial environments.
Q
What types of gases or fluids is this sensor compatible with?
The sensor is designed for use with non-corrosive fluids compatible with SUS316 stainless steel and FKM (fluoroelastomer) materials. It is not suitable for highly corrosive media.
Q
Does this sensor support RS485 communication?
Yes, the sensor supports RS485 communication with a maximum connection distance of up to 1200m. It supports multiple baud rates including 9600bps, 19200bps, 38400bps, 57600bps, and 115200bps.
Q
What is the operating temperature range for this pressure sensor?
The ambient operating temperature range is 0℃ to 50℃. For storage, the sensor can withstand temperatures from -10℃ to 60℃ without water condensation or freezing.
Q
What are the typical application industries for this pressure sensor?
This sensor is widely used in pipeline pressure monitoring, air leak testing, F.R.L (Filter, Regulator, Lubricator) systems, gas storage cylinders, adsorption verification processes, and air compressor systems across various industrial sectors.