8613410535143
China Suppliers Factory JK80 Series Corrosion-Resistant Pressure Sensor with RS485 Communication and Waterproof IP65 Design
Application Industry
Pipeline pressure monitoring
Air leak testing
F.R.L (Filter, Regulator, Lubricator)
Gas storage cylinders
Adsorption verification
Air compressors
Product Parameters
Parameter Category |
Specific Parameter |
Specification |
Withstand Pressure |
High pressure |
3.0MPa (high pressure) |
Positive pressure |
1.5MPa (positive pressure) |
|
Compound pressure |
500kPa (compound pressure) |
|
Rated Pressure Range |
High pressure |
0.000～1.999MPa (high pressure) |
Positive pressure |
-0.100～1.000MPa (positive pressure) |
|
Compound pressure |
-100～100kPa (compound pressure) |
|
Protection Grade |
- |
IP65 |
Set Pressure Range |
High pressure |
-0.103～1.999MPa (high pressure) |
Positive and negative pressure |
-0.103～1.030MPa (positive and negative pressure) |
|
Compound pressure |
-103.0～103.0KPa (positive pressure) |
|
Display Refresh Rate |
- |
5 times/second |
RS485 Communication Distance |
- |
Maximum connection distance ≤1200m |
Ambient Temperature |
- |
0～50℃ |
Color |
- |
Red |
Load Current |
- |
≤200mA |
Humidity |
Action and storage |
35～85% (no water condensation) |
Internal Pressure Drop |
- |
≤1.0V |
Wire Specification |
- |
Oil-resistant PVC cable (0.15mm²) |
Current Consumption |
No load |
≤40mA |
Repeatability Accuracy |
- |
±0.3%F.S ±1digit |
Linearity |
- |
±1%F.S |
Action Indication |
- |
OUT1 |
Weight |
|
Approximately 148g |
Applicable Gas |
- |
Non-corrosive fluid for SUS316 and FKM |
Minimum Unit Scale Value |
Positive pressure type kPa |
kPa(0.001), kgf/cm²(0.01), bar(0.01), psi(0.1) |
Micro and positive-negative pressure type kPa |
kPa(0.1), mmHg(1), kgf/cm²(0.001), bar(0.001), psi(0.01), inHg(0.1) |
|
Vibration Resistance |
Amplitude, frequency, time |
Amplitude 1.5mm, 10Hz～55Hz～10Hz per minute, 2 hours for each of X, Y, Z directions |
Storage Temperature |
Storage |
-10℃～60℃ (without water condensation and freezing) |
Temperature Characteristic |
- |
±3%F.S, reference temperature 25℃ (0～50℃ temperature range) |
Baud Rate |
- |
9600bps, 19200bps, 38400bps, 57600bps, 115200bps |
Insulation Resistance |
Between lead and plastic shell |
≥50MΩ (DC 500V) |
Output Voltage |
Rated voltage |
0.6V～5V ±2.5%F.S (rated voltage) |
Display Accuracy |
- |
±1%F.S ±1digit (temperature 25±3℃) |
Withstand Voltage |
Between lead and plastic shell |
AC 1000V for 1 minute |
Impact Resistance |
- |
100m/s²(10G), 3 times for each of X, Y, Z directions |
Output Type |
- |
Open collector output (NPN or PNP, up to 2 outputs) |
Interface Diameter |
- |
RC1/8" VCR1/4" R1/4" 1/4" |
Response Time |
- |
≤2.5ms (can be set to 25, 100, 250, 500, 1000, 1500ms) |
Design Aesthetics
Frequently Asked Questions (FAQ)
Q
What is the maximum withstand pressure of this pressure sensor?
The sensor supports up to 3.0MPa for high pressure types, 1.5MPa for positive pressure types, and 500kPa for compound pressure types, making it suitable for a wide range of industrial pressure monitoring applications.
Q
What is the protection grade of this product?
This pressure sensor carries an IP65 protection rating, meaning it is fully dust-tight and protected against low-pressure water jets, making it reliable for use in demanding industrial environments.
Q
What types of gases or fluids is this sensor compatible with?
The sensor is compatible with non-corrosive fluids suitable for SUS316 stainless steel and FKM (fluoroelastomer) materials, covering most common industrial gases and non-aggressive liquids.
Q
Does this sensor support RS485 communication, and what is the maximum distance?
Yes, the sensor supports RS485 communication with a maximum connection distance of up to 1200 meters. It also supports multiple baud rates: 9600bps, 19200bps, 38400bps, 57600bps, and 115200bps, providing flexible integration into industrial automation systems.
Q
What are the typical application industries for this pressure sensor?
This sensor is widely used in pipeline pressure monitoring, air leak testing, F.R.L (Filter, Regulator, Lubricator) systems, gas storage cylinders, adsorption verification systems, and air compressors, covering a broad spectrum of pneumatic and industrial automation scenarios.
Q
What is the response time of the sensor, and can it be customized?
The default response time is ≤2.5ms, and it can be flexibly configured to 25ms, 100ms, 250ms, 500ms, 1000ms, or 1500ms depending on the application requirements, offering excellent adaptability for both fast-response and stable-monitoring scenarios.