8613410535143
China Suppliers Factory JK20 Series Corrosion-resistant Pressure Sensor for Semiconductor Industries
Application Industry
Pipeline pressure monitoring
Air leak testing
F.R.L (Filter, Regulator, Lubricator)
Gas storage cylinders
Adsorption verification
Air compressors
Product Parameters
Parameter Category |
Specific Parameter |
Specification |
Withstand Pressure |
High pressure |
3.0MPa (high pressure) |
Positive pressure |
2.0MPa (positive pressure) |
|
Compound pressure |
500kPa (compound pressure) |
|
Rated Pressure Range |
High pressure |
0.000～2.000MPa (high pressure) |
Positive pressure |
-0.100～1.000MPa (positive pressure) |
|
Compound pressure |
-100～100kPa (compound pressure) |
|
Protection Grade IP65 |
- |
IP65 |
Set Pressure Range |
High pressure |
-0.103～2.030MPa (high pressure) |
Positive and negative pressure |
-0.103～1.030MPa (positive and negative pressure) |
|
Compound pressure |
-103.0～103.0KPa (positive pressure) |
|
Display Refresh Rate |
- |
5 times/second |
RS485 Communication Distance |
- |
Maximum connection distance ≤1200m |
Ambient Temperature |
- |
0～50℃ |
Color |
- |
3 colors （white red orange） |
Load Current |
- |
≤200mA |
Humidity |
Action and storage |
35～85% (no water condensation) |
Internal Pressure Drop |
- |
≤1.0V |
Wire Specification |
- |
Oil-resistant PVC cable (0.15mm²) |
Current Consumption |
No load |
≤40mA |
Repeatability Accuracy |
- |
±0.3%F.S ±1digit |
Linearity |
- |
±1%F.S |
Action Indication |
- |
OUT1 |
Weight |
|
Approximately 108g |
Applicable Gas |
- |
Non-corrosive fluid for SUS316 and FKM |
Minimum Unit Scale Value |
Positive pressure type kPa |
kPa(0.001), kgf/cm²(0.01), bar(0.01), psi(0.1) |
Micro and positive-negative pressure type kPa |
kPa(0.1), mmHg(1), kgf/cm²(0.001), bar(0.001), psi(0.01), inHg(0.1) |
|
Vibration Resistance |
Amplitude, frequency, time |
Amplitude 1.5mm, 10Hz～55Hz～10Hz per minute, 2 hours for each of X, Y, Z directions |
Storage Temperature |
Storage |
-10℃～60℃ (without water condensation and freezing) |
Temperature Characteristic |
- |
±3%F.S, reference temperature 25℃ (0～50℃ temperature range) |
Baud Rate |
- |
9600bps, 19200bps, 38400bps, 57600bps, 115200bps |
Insulation Resistance |
Between lead and plastic shell |
≥50MΩ (DC 500V) |
Output Voltage |
Rated voltage |
0.6V～5V ±2.5%F.S (rated voltage) |
Display Accuracy |
- |
±1%F.S ±1digit (temperature 25±3℃) |
Withstand Voltage |
Between lead and plastic shell |
AC 1000V for 1 minute |
Impact Resistance |
- |
100m/s²(10G), 3 times for each of X, Y, Z directions |
Output Type |
- |
Open collector output (NPN or PNP, up to 2 outputs) |
Interface Diameter |
- |
RC1/8" VCR1/4" R1/4" M5" |
Response Time |
- |
≤2.5ms (can be set to 25, 100, 250, 500, 1000, 1500ms) |
Design Aesthetics
Frequently Asked Questions
Q
What is the maximum withstand pressure of this pressure sensor?
The sensor supports up to 3.0MPa for high pressure applications, 2.0MPa for positive pressure, and 500kPa for compound pressure configurations, ensuring reliable operation across a wide range of industrial scenarios.
Q
What is the IP protection rating of this product?
This pressure sensor carries an IP65 protection rating, making it dustproof and protected against low-pressure water jets. It is well-suited for demanding industrial environments including pipeline monitoring and air compressor systems.
Q
What communication interfaces does this sensor support?
The sensor supports RS485 communication with a maximum connection distance of up to 1200m. It also supports multiple baud rates: 9600bps, 19200bps, 38400bps, 57600bps, and 115200bps, allowing flexible integration into various automation systems.
Q
What types of gases or fluids is this sensor compatible with?
This sensor is designed for use with non-corrosive fluids that are compatible with SUS316 stainless steel and FKM (fluoroelastomer) materials. It is not recommended for use with corrosive or aggressive media.
Q
What output types are available for this pressure sensor?
The sensor offers open collector output in both NPN and PNP configurations, supporting up to 2 outputs. The output voltage range is 0.6V to 5V (±2.5% F.S), making it compatible with a wide range of PLCs and control systems.
Q
What are the typical application industries for this pressure sensor?
This sensor is widely applied in pipeline pressure monitoring, air leak testing, F.R.L (Filter, Regulator, Lubricator) units, gas storage cylinders, adsorption verification systems, and air compressors — covering a broad spectrum of pneumatic and industrial automation applications.