8613410535143
China JK50 Series Waterproof Pressure Sensor IP65 - Reliable Suppliers and Factory for Advanced Stability
Application Industry
Pipeline pressure monitoring
Air leak testing
F.R.L (Filter, Regulator, Lubricator)
Gas storage cylinders
Adsorption verification
Air compressors
Product Parameters
Parameter Category |
Specific Parameter |
Specification |
Withstand Pressure |
Micro pressure |
20kPa (micro pressure) |
Positive pressure |
1.5MPa (positive pressure) |
|
Compound pressure |
500kPa (compound pressure) |
|
Rated Pressure Range |
Micro pressure |
-10～10kPa (micro pressure) |
Positive pressure |
-0.100～1.000MPa (positive pressure) |
|
Compound pressure |
-100～100kPa (positive pressure) |
|
Protection Grade |
- |
IP65 |
Set Pressure Range |
Micro pressure |
-10.3～10.3kPa (micro pressure) |
Positive and negative pressure |
-0.100～1.000MPa (positive and negative pressure) |
|
Compound pressure |
-103.0～103.0KPa (positive pressure) |
|
Display Refresh Rate |
- |
5 times/second |
RS485 Communication Distance |
- |
Maximum connection distance ≤1200m |
Ambient Temperature |
- |
0～50℃ |
Color |
- |
Red |
Load Current |
- |
≤200mA |
Humidity |
Action and storage |
35～85% (no water condensation) |
Internal Pressure Drop |
- |
≤1.0V |
Wire Specification |
- |
Oil-resistant PVC cable (0.15mm²) |
Current Consumption |
No load |
≤40mA |
Repeatability Accuracy |
- |
±0.3%F.S ±1digit |
Linearity |
- |
±1%F.S |
Action Indication |
- |
OUT1 |
Weight |
|
Approximately 108g |
Applicable Gas |
- |
Filtered air, Non-corrosive/Non-flammable gas |
Minimum Unit Scale Value |
Positive pressure type kPa |
kPa(0.001), kgf/cm²(0.01), bar(0.01), psi(0.1) |
Micro and positive-negative pressure type kPa |
kPa(0.1), mmHg(1), kgf/cm²(0.001), bar(0.001), psi(0.01), inHg(0.1) |
|
Vibration Resistance |
Amplitude, frequency, time |
Amplitude 1.5mm, 10Hz～55Hz～10Hz per minute, 2 hours for each of X, Y, Z directions |
Storage Temperature |
Storage |
-10℃～60℃ (without water condensation and freezing) |
Temperature Characteristic |
- |
±3%F.S, reference temperature 25℃ (0～50℃ temperature range) |
Baud Rate |
- |
9600bps, 19200bps, 38400bps, 57600bps, 115200bps |
Insulation Resistance |
Between lead and plastic shell |
≥50MΩ (DC 500V) |
Output Voltage |
Rated voltage |
0.6V～5V ±2.5%F.S (rated voltage) |
Display Accuracy |
- |
±1%F.S ±1digit (temperature 25±3℃) |
Withstand Voltage |
Between lead and plastic shell |
AC 1000V for 1 minute |
Impact Resistance |
- |
100m/s²(10G), 3 times for each of X, Y, Z directions |
Output Type |
- |
Open collector output (NPN or PNP, up to 2 outputs) |
Interface Diameter |
- |
RC1/8 |
Response Time |
- |
≤2.5ms (can be set to 25, 100, 250, 500, 1000, 1500ms) |
Design Aesthetics
Frequently Asked Questions
Q
What pressure types does this pressure sensor support?
This pressure sensor supports three pressure types: micro pressure (rated range -10～10kPa), positive pressure (rated range -0.100～1.000MPa), and compound pressure (rated range -100～100kPa), making it suitable for a wide range of industrial measurement scenarios.
Q
What is the protection grade of this product and what environments is it suitable for?
The product carries an IP65 protection rating, which means it is fully dust-tight and protected against low-pressure water jets. It is suitable for use in industrial environments such as pipeline pressure monitoring, air leak testing, air compressor systems, and F.R.L (Filter, Regulator, Lubricator) assemblies.
Q
Does this sensor support RS485 communication, and what is the maximum communication distance?
Yes, this sensor supports RS485 communication with a maximum connection distance of ≤1200m. It supports multiple baud rates including 9600bps, 19200bps, 38400bps, 57600bps, and 115200bps, offering flexible integration into industrial automation systems.
Q
What types of gases can this pressure sensor be used with?
This sensor is designed for use with filtered air and non-corrosive, non-flammable gases. It is not recommended for use with corrosive chemicals or flammable/explosive gases to ensure safe and reliable operation.
Q
What is the display accuracy and response time of the sensor?
The display accuracy is ±1%F.S ±1digit at a reference temperature of 25±3℃, with a display refresh rate of 5 times per second. The response time is ≤2.5ms by default, and can be configured to 25, 100, 250, 500, 1000, or 1500ms depending on application requirements.
Q
What output types are available and what are the electrical specifications?
The sensor provides open collector output supporting both NPN and PNP configurations, with up to 2 outputs available. The load current is ≤200mA, current consumption (no load) is ≤40mA, and the output voltage ranges from 0.6V to 5V ±2.5%F.S. The insulation resistance between lead and plastic shell is ≥50MΩ (DC 500V), and withstand voltage is AC 1000V for 1 minute.