8613410535143
China JK50 Series Waterproof Pressure Sensor - IP65 Rated, Stable Performance from Leading Suppliers and Factory
▶ Application Industry
Pipeline pressure monitoring
Air leak testing
F.R.L (Filter, Regulator, Lubricator)
Gas storage cylinders
Adsorption verification
Air compressors
▶ Product Parameters
Parameter Category |
Specific Parameter |
Specification |
Withstand Pressure |
Micro pressure |
20kPa (micro pressure) |
Positive pressure |
1.5MPa (positive pressure) |
|
Compound pressure |
500kPa (compound pressure) |
|
Rated Pressure Range |
Micro pressure |
-10～10kPa (micro pressure) |
Positive pressure |
-0.100～1.000MPa (positive pressure) |
|
Compound pressure |
-100～100kPa (positive pressure) |
|
Protection Grade |
- |
IP65 |
Set Pressure Range |
Micro pressure |
-10.3～10.3kPa (micro pressure) |
Positive and negative pressure |
-0.100～1.000MPa (positive and negative pressure) |
|
Compound pressure |
-103.0～103.0KPa (positive pressure) |
|
Display Refresh Rate |
- |
5 times/second |
RS485 Communication Distance |
- |
Maximum connection distance ≤1200m |
Ambient Temperature |
- |
0～50℃ |
Color |
- |
Red |
Load Current |
- |
≤200mA |
Humidity |
Action and storage |
35～85% (no water condensation) |
Internal Pressure Drop |
- |
≤1.0V |
Wire Specification |
- |
Oil-resistant PVC cable (0.15mm²) |
Current Consumption |
No load |
≤40mA |
Repeatability Accuracy |
- |
±0.3%F.S ±1digit |
Linearity |
- |
±1%F.S |
Action Indication |
- |
OUT1 |
Weight |
|
Approximately 108g |
Applicable Gas |
- |
Filtered air, Non-corrosive/Non-flammable gas |
Minimum Unit Scale Value |
Positive pressure type kPa |
kPa(0.001), kgf/cm²(0.01), bar(0.01), psi(0.1) |
Micro and positive-negative pressure type kPa |
kPa(0.1), mmHg(1), kgf/cm²(0.001), bar(0.001), psi(0.01), inHg(0.1) |
|
Vibration Resistance |
Amplitude, frequency, time |
Amplitude 1.5mm, 10Hz～55Hz～10Hz per minute, 2 hours for each of X, Y, Z directions |
Storage Temperature |
Storage |
-10℃～60℃ (without water condensation and freezing) |
Temperature Characteristic |
- |
±3%F.S, reference temperature 25℃ (0～50℃ temperature range) |
Baud Rate |
- |
9600bps, 19200bps, 38400bps, 57600bps, 115200bps |
Insulation Resistance |
Between lead and plastic shell |
≥50MΩ (DC 500V) |
Output Voltage |
Rated voltage |
0.6V～5V ±2.5%F.S (rated voltage) |
Display Accuracy |
- |
±1%F.S ±1digit (temperature 25±3℃) |
Withstand Voltage |
Between lead and plastic shell |
AC 1000V for 1 minute |
Impact Resistance |
- |
100m/s²(10G), 3 times for each of X, Y, Z directions |
Output Type |
- |
Open collector output (NPN or PNP, up to 2 outputs) |
Interface Diameter |
- |
RC1/8 |
Response Time |
- |
≤2.5ms (can be set to 25, 100, 250, 500, 1000, 1500ms) |
▶ Design Aesthetics
? Frequently Asked Questions
Q
What is the maximum withstand pressure of this pressure sensor?
The sensor supports up to 1.5MPa for positive pressure, 20kPa for micro pressure, and 500kPa for compound pressure, making it suitable for a wide range of industrial pressure monitoring applications.
Q
What is the protection grade of this pressure sensor?
This pressure sensor is rated IP65, which means it is fully dust-tight and protected against water jets from any direction, ensuring reliable performance in demanding industrial environments.
Q
What types of gases are compatible with this sensor?
The sensor is designed for use with filtered air and non-corrosive, non-flammable gases. It is not suitable for corrosive or flammable gas media.
Q
Does this sensor support RS485 communication, and what is the maximum cable distance?
Yes, the sensor supports RS485 communication with a maximum connection distance of up to 1200 meters. It also supports multiple baud rates including 9600bps, 19200bps, 38400bps, 57600bps, and 115200bps.
Q
What are the typical application scenarios for this pressure sensor?
This sensor is widely used in pipeline pressure monitoring, air leak testing, F.R.L units (Filter, Regulator, Lubricator), gas storage cylinders, adsorption verification systems, and air compressors.
Q
What output types does this pressure sensor support?
The sensor supports open collector output in both NPN and PNP configurations, with up to 2 outputs available. The response time is ≤2.5ms and can be configured to 25, 100, 250, 500, 1000, or 1500ms depending on application requirements.