8613410535143
China JK20 Series Corrosion-Resistant Pressure Sensor - Reliable Suppliers and Factory for Semiconductor Industries
Application Industry
📌 Pipeline pressure monitoring
📌 Air leak testing
📌 F.R.L (Filter, Regulator, Lubricator)
📌 Gas storage cylinders
📌 Adsorption verification
📌 Air compressors
Product Parameters
Parameter Category |
Specific Parameter |
Specification |
Withstand Pressure |
High pressure |
3.0MPa (high pressure) |
Positive pressure |
2.0MPa (positive pressure) |
|
Compound pressure |
500kPa (compound pressure) |
|
Rated Pressure Range |
High pressure |
0.000～2.000MPa (high pressure) |
Positive pressure |
-0.100～1.000MPa (positive pressure) |
|
Compound pressure |
-100～100kPa (compound pressure) |
|
Protection Grade |
- |
IP65 ✔ Certified |
Set Pressure Range |
High pressure |
-0.103～2.030MPa (high pressure) |
Positive and negative pressure |
-0.103～1.030MPa (positive and negative pressure) |
|
Compound pressure |
-103.0～103.0KPa (positive pressure) |
|
Display Refresh Rate |
- |
5 times/second |
RS485 Communication Distance |
- |
Maximum connection distance ≤1200m |
Ambient Temperature |
- |
0～50℃ |
Color |
- |
3 colors（white red orange） |
Load Current |
- |
≤200mA |
Humidity |
Action and storage |
35～85% (no water condensation) |
Internal Pressure Drop |
- |
≤1.0V |
Wire Specification |
- |
Oil-resistant PVC cable (0.15mm²) |
Current Consumption |
No load |
≤40mA |
Repeatability Accuracy |
- |
±0.3%F.S ±1digit |
Linearity |
- |
±1%F.S |
Action Indication |
- |
OUT1 |
Weight |
|
Approximately 108g |
Applicable Gas |
- |
Non-corrosive fluid for SUS316 and FKM |
Minimum Unit Scale Value |
Positive pressure type kPa |
kPa(0.001), kgf/cm²(0.01), bar(0.01), psi(0.1) |
Micro and positive-negative pressure type kPa |
kPa(0.1), mmHg(1), kgf/cm²(0.001), bar(0.001), psi(0.01), inHg(0.1) |
|
Vibration Resistance |
Amplitude, frequency, time |
Amplitude 1.5mm, 10Hz～55Hz～10Hz per minute, 2 hours for each of X, Y, Z directions |
Storage Temperature |
Storage |
-10℃～60℃ (without water condensation and freezing) |
Temperature Characteristic |
- |
±3%F.S, reference temperature 25℃ (0～50℃ temperature range) |
Baud Rate |
- |
9600bps, 19200bps, 38400bps, 57600bps, 115200bps |
Insulation Resistance |
Between lead and plastic shell |
≥50MΩ (DC 500V) |
Output Voltage |
Rated voltage |
0.6V～5V ±2.5%F.S (rated voltage) |
Display Accuracy |
- |
±1%F.S ±1digit (temperature 25±3℃) |
Withstand Voltage |
Between lead and plastic shell |
AC 1000V for 1 minute |
Impact Resistance |
- |
100m/s²(10G), 3 times for each of X, Y, Z directions |
Output Type |
- |
Open collector output (NPN or PNP, up to 2 outputs) |
Interface Diameter |
- |
RC1/8" VCR1/4" R1/4" M5" |
Response Time |
- |
≤2.5ms (can be set to 25, 100, 250, 500, 1000, 1500ms) |
Design Aesthetics
Frequently Asked Questions (FAQ)
Q
What is the maximum withstand pressure of this pressure sensor?
The sensor supports up to 3.0MPa for high pressure, 2.0MPa for positive pressure, and 500kPa for compound pressure, making it suitable for a wide range of industrial pressure monitoring applications.
Q
What is the IP protection rating of this product?
This pressure sensor carries an IP65 protection rating, which means it is fully dust-tight and protected against low-pressure water jets, making it reliable for use in demanding industrial environments.
Q
What industries and applications is this pressure sensor suitable for?
This sensor is widely used across multiple industries, including pipeline pressure monitoring, air leak testing, F.R.L systems (Filter, Regulator, Lubricator), gas storage cylinders, adsorption verification, and air compressors.
Q
Does the sensor support RS485 communication, and what is the maximum connection distance?
Yes, the sensor supports RS485 communication with a maximum connection distance of ≤1200m. It also supports multiple baud rates: 9600bps, 19200bps, 38400bps, 57600bps, and 115200bps, providing flexible integration with industrial control systems.
Q
What types of gases or fluids are compatible with this sensor?
The sensor is compatible with non-corrosive fluids suitable for SUS316 stainless steel and FKM (fluoroelastomer) materials. It is not recommended for use with highly corrosive or aggressive chemical media.
Q
What output types and interface options does this pressure sensor offer?
The sensor provides an open collector output supporting both NPN and PNP configurations with up to 2 outputs. Available interface diameters include RC1/8", VCR1/4", R1/4", and M5", offering versatile installation compatibility for various pneumatic systems.